Home / Service & HR / HoReCa staff shortage: how to find and keep staff in 2026
Service & HRUpdated October 25, 202613 min read

HoReCa staff shortage in 2026: what I saw in kitchen audits and how to stop paying UAH 15,000–25,000 for every cook replacement

The HoReCa staff shortage in 2026 cannot be solved by hiring alone. Three steps work together: cut the labour intensity of every portion (equipment, menu, prep), make the shift predictable and safe, and measure hiring, onboarding and turnover in hryvnia. That stabilises the team without an endless pay race.


82%
of employers name the staff shortage as their main challenge (OLX Robota, February 2026)
UAH 15–25k
modelled cost of replacing one cook
46%
of workers name stress as the main reason for quitting

The scale of the shortage: what the 2026 data shows

The HoReCa staffing crunch is no longer seasonal. In an OLX Robota survey (February 2026), 82% of employers named it the main challenge of the previous six months. As of early May 2026, cafés and restaurants accounted for about 15,000 vacancies on the Unified Vacancy Portal — 7% of 230,000.

The shortage is sharpest for cooks and kitchen assistants, waiters, bartenders and technical staff. It is not only a front-of-house problem: the pass and the dish pit are the tightest points in a venue's P&L, because one delay there stops the whole shift.

IndicatorSourceValue
Employers naming the staff shortage as the main challengeOLX Robota, Feb 202682%
Workers considering a move to another industryOLX Robota, Feb 202624% within 1–2 years, another 16% within six months
Café and restaurant vacancies on the Unified Vacancy PortalState Employment Service, May 2026≈15,000 (7% of 230,000)
Median salary in cook vacancies (seasonal offers)OLX Robota, May 2026UAH 33,000
Average waiter salaryWork.ua, Jan 2026≈UAH 25,000 (UAH 12,000 in Jan 2023)
Median salary in vacancies across UkraineWork.ua, Sept 2026UAH 30,000, +18% year on year

The takeaway for an owner is simple: this is a candidate's market. A cook with a median offer of UAH 33,000 is not choosing between two restaurants but between a venue, delivery, a factory and work abroad. A pay rise without changes to conditions and workload does not last — a competitor raises theirs next month.

Why people leave: stress, money, no growth

In the same OLX Robota survey, the main reasons for quitting were high stress (46%), low pay (44%) and no career growth (29%). Among those who felt conditions worsen, 52% pointed to heavier physical workload from power cuts and manual work, and 45% to increased anxiety.

These numbers change the order of action. Pay is the second reason, not the first. Stress and workload result from kitchen design, scheduling and equipment reliability — things an owner fully controls.

Hiring and pay rises only

What it gives

A quick effect in 1–2 months and simple to implement.

Risk

A competitor raises the rate and you lose. The payroll grows, turnover stays.

A system: workload + conditions + growth

What it gives

Reduces dependence on any single cook, removes causes of stress and gives people a reason to stay.

Risk

Takes 2–3 months and measurement discipline; without metrics it turns into a list of initiatives.

What an empty spot on the line costs: a P&L model

In a venue's financial model the staffing gap shows up on two lines: direct replacement costs and lost margin from limited throughput. Most owners see only the first, although the second is usually larger.

The cost of one cook replacement

Below is an eeat.com.ua modelled estimate based on a median salary of UAH 33,000. Plug in your own rates and sous-chef time: the structure of the calculation matters more than exact figures.

ComponentWhat it includesEstimate, UAH thousand
Search and interviewsAds, HR and sous-chef time for screening and trial shifts1.5–3
Mentoring≈20 sous-chef hours to onboard to a station and HACCP standards3–5
Reduced productivityFor the first 4 weeks the new hire is slower and makes more mistakes6–10
Covering vacant shiftsTeam overtime, cover shifts, temporarily pulled menu items4.5–7
TotalOne line-cook replacement15–25
Turnover loss = replacements per year × (search + mentoring + reduced productivity + shift cover)

What an unfilled vacancy costs

The second part of the model is lost margin. If a short-staffed hot line cannot serve some guests, or the venue pulls labour-intensive dishes, the effect shows in revenue, not in the payroll sheet.

Lost margin = missed covers per day × average check × (1 − food cost) × working days

An illustrative example: 15 missed covers a day, an average check of UAH 450, food cost 35%, 26 working days. Result: 15 × 450 × 0.65 × 26 ≈ UAH 114,000 a month. That is roughly three and a half times the UAH 33,000 salary the owner "saves" on an open vacancy.

Annual turnover: a model for a team of 12 cooks

Annual turnoverReplacementsDirect cost, UAH thousandSaving vs 60%, UAH thousand
60%7105–175—
40%575–12530–50
25%345–7560–100

This is direct cost only, without the lost margin from the previous block. The 60% starting point is a model assumption; calculate your real figure for the last 12 months.

Here is what I saw in practice: equipment, food cost and ticket time

Here is what I saw in practice: in venues short of cooks, the most accessible reserve is not hiring but re-equipping the hot kitchen. A combi oven with programs, a blast chiller and standardised smallwares move part of the work from "needs an experienced cook" to "needs a trained operator".

That changes the hiring funnel. A candidate without five years of experience can be put on the line in weeks rather than months, and one cook holds more orders at peak.

Model: range and oven vs combi oven

IndicatorRange and ovenCombi oven (programs)
Meat weight loss in cooking (assumption)28%18%
Raw product per 180 g cooked portion250 g≈220 g
Raw cost per portion (UAH 320/kg)UAH 80≈UAH 70
Dish food cost at a UAH 350 price22.9%≈20%
Active cook time per portion3.0 min1.2 min
Average hot-dish ticket time at peak16 min12 min

At 60 portions a day (1,800 a month) the raw-product difference is about UAH 17,000–18,000. The freed time is 1.8 min × 1,800 portions = 54 hours a month. These are model numbers on typical assumptions, not a guarantee for your menu.

Savings on product and time are a secondary effect. The main one is flattening the peak: when the program finishes the product itself, the shift does not break at peak and pressure on the person drops.

How to test this in your own kitchen in one day

  1. Pick one high-volume item (for example, chicken thigh).
  2. Weigh the raw product for 20 portions.
  3. Cook the batch two ways: the usual method and a combi oven program.
  4. Weigh the cooked product and calculate weight loss for each method.
  5. Use a stopwatch to record the cook's active time and the time from ticket to pass.
  6. Put the results into the portion-cost formula and compare with the model above.

Non-obvious factors: hard water, ergonomics, the kitchen heat map

Hard water quietly kills heating elements at the worst moment

Here is what I saw in practice: a combi oven is bought for power and price, and water is remembered only when the steam generator stops a shift. In many regions of southern and eastern Ukraine, water hardness exceeds manufacturers' requirements: scale shortens heating-element life, raises energy use and causes errors mid-service.

Before buying, ask for a water analysis (hardness, chlorides) and compare it with the manufacturer's requirements, not with the salesperson's promise. Below is a five-year TCO model for water that exceeds the norm.

Cost item over 5 years, UAH thousandNo water treatmentWith filtration and softening
Upfront cost030–60
Consumables and descaling agents20–3030–50
Heating element and steam generator repairs40–700–35
Downtime (a day ≈ UAH 8–12k)64–120 (8–10 days)8–24 (1–2 days)
Total124–22068–169

The ranges overlap, and that is an honest conclusion: with soft water, treatment does not pay back. A day of downtime in the model means moving items to the range, overtime and dishes dropped from sales. Such failures irritate the team most, because the line feels the consequences, not the person who bought the equipment.

Smallwares ergonomics reduces turnover

The weight of GN pans, table height, trolley handles and dishwasher access are what a worker feels for 8–12 hours. In an exit interview a cook rarely says "awkward dish pit" but does say "tiredness" and "stress". Those are the words behind the 46% in the survey.

For the audit, use a kitchen heat map: draw the routes of key stations during the peak hour on a floor plan and mark where they cross. Crossing points mean spills, collisions with hot items and tension. Moving a station is cheaper than replacing a person.

  • Dish pit: a "dirty to clean" route without counter-flow and an anti-slip, cushioned floor.
  • Work surfaces: height matched to the team, adjustable tables or platforms at prep stations.
  • Heat control: extraction and make-up air sized for real load, not nameplate values.
  • Power: an electric 10-GN combi oven draws roughly 15–20 kW, which makes it a defining item when choosing a generator and UPS.
Non-obvious point: according to OLX Robota, 71% of venues have already invested in energy autonomy. But a generator that cannot carry the key equipment does not lift the load from people — the cook goes back to manual work, which 52% of respondents name as the main deterioration.

Where to find staff in 2026: channels and the hiring funnel

Recruiting works as a funnel with measurable stages, not as an ad on one site. Build it like a sales line: source, response, trial shift, decision, onboarding.

ChannelSpeedWho it bringsComment
Work.ua, Robota.ua, OLX RobotaDaysAssistants, waiters, bartendersPay and schedule in the ad text; reply to candidates within two hours
State Employment ServiceWeeksKitchen assistants, cooks after retrainingCheck current training and employer compensation programs — terms change
Colleges and vocational schoolsMonthsYoung cooks and pastry cooksInternships with a mentor; agree before the academic year starts
Staff referral program1–3 weeksVetted cooks and sous-chefsPay the bonus after the candidate's third month, not on the first day
Local cook chats on Telegram and InstagramDaysExperienced people open to a moveNeeds kitchen photos, an open rate and reviews from the current team
IDPs, veterans, workers 50+WeeksResponsible, stability-orientedAdapt schedule and workstation; this is part of the funnel, not charity

The hiring funnel, step by step

  1. A vacancy with an open pay rate and schedule. 27% of employers complain about unrealistic salary expectations; a range in the text filters mismatches at the start.
  2. A reply within two hours. In a candidate's market, speed is already a competitive advantage.
  3. A 15-minute screen: experience, schedule, expectations, readiness for a trial shift.
  4. A paid 4–6 hour trial shift with a specific task from a recipe card.
  5. A decision within 24 hours and a clear plan for the first 30 days.
  6. HACCP briefing on day one: temperature ranges, labelling, "dirty to clean" routes.
Non-obvious point: a paid trial shift is not only a filter but also advertising. The candidate sees the kitchen, the equipment and the people, and equipment with sound ergonomics often persuades more effectively than an offer of UAH 2,000 extra.

How to retain the team: four building blocks

Retention also works on the "line" principle: each block removes one of the causes named in the survey. Below is the order in which I recommend implementing them.

1. Workload: equipment, ergonomics, digital HACCP

Paper temperature logs and manual checklists add routine for sous-chefs that nobody needs. Digital monitoring and automatic alerts free attention for dish quality and lower background anxiety.

2. Schedule: predictability instead of heroics

Publish the rota 2–4 weeks ahead and do not change it without compensation. Write a protocol for air-raid alerts and power cuts: where the team goes, what happens to guests, who decides. Uncertainty raises stress more than the event itself.

3. Money: a transparent grid and a stability bonus

Show the team the pay formula: base rate, station premiums, performance bonuses. Pay part of the bonus at 3 and 6 months of tenure so that the cost of leaving for a competitor grows over time. Review rates every six months against the market median, not by the owner's decree.

4. Growth: a skills matrix and cross-training

No prospects is the reason for leaving for 29% of workers in the survey. Offer a path "assistant → station cook → hot-line cook → sous-chef", where every step has a skills list and a premium. Cross-training (hot, cold, prep) both covers absence risk and gives people a sense of progress.

Do you supply equipment, an HR service or HACCP automation for venues? Tell us about your product.

Contact us

30–60–90 day onboarding

  1. Days 1–7: a mentor, HACCP briefing, work from recipe cards under supervision.
  2. Days 8–30: own station, a short weekly feedback talk.
  3. Days 31–60: assessment against a skills checklist, first bonus payout.
  4. Days 61–90: a conversation about growth and training, decision on a pay premium.

Run a "stay interview" once a quarter: what keeps you with us, what could make you leave, and what would you change. It is a cheaper way to see the causes of turnover than analysing them after someone has left.

Regional angle: power, safety, water

There is no single Ukrainian recipe, but two factors repeat in every region: power and shift safety. The rest vary. The table below gives audit pointers, not statistics.

RegionTypical featureWhat to do
Kharkiv, Dnipropetrovsk, Zaporizhzhia regionsMore alerts and logistics risk, staff outflow, often hard waterShift safety protocol, water analysis before buying equipment, flexible schedule
KyivStrong competition for cooks from chains and deliveryGrade system, career steps, a fast hiring funnel
Lviv and the westAn influx of displaced people, but seasonal competition from resortsAn IDP pool, seasonal contracts with a path to permanent work
Odesa and the southSeasonal peaks, water, dependence on the resort seasonWater treatment, training the seasonal reserve before the peak

For equipment, the regional factor is also service: engineer response time and spare-parts stock. For a venue in a city with poor service logistics, "cheap" equipment becomes expensive, because every day of downtime hits the team and revenue.

A 90-day plan, step by step

  1. Days 1–14. Audit. Calculate 12-month turnover, replacement cost using the table above and missed covers; draw the kitchen heat map and check the water.
  2. Days 15–30. Quick changes. Vacancies with an open rate, replies within two hours, a paid trial shift, a referral program, a rota two weeks ahead.
  3. Days 31–60. Workload. The 20-portion test, a combi oven program pilot, moving problem stations, digital HACCP.
  4. Days 61–90. Growth. A skills matrix, stay interviews, a pay-grid review, re-measuring the metrics and a decision on equipment investment.
MetricHow to calculateWhat counts as a signal
12-month turnoverLeavers ÷ average headcountA rise versus the previous quarter
Time-to-fillDays from posting to start dateMore than 30 days for a line position
Cost-per-hireRecruiting spend ÷ number hiredA rise without a rise in quality
Labour cost share of revenueLabour cost ÷ revenueA sharp rise without sales growth
Covers per labour hourGuests served ÷ kitchen hours workedA drop with steady guest flow

Recommendations for owners and investors

  1. Calculate the cost of turnover in hryvnia. Without it, no decision on pay or equipment has a basis.
  2. Invest in cutting the labour intensity of a portion, not only in the payroll: programmable processes widen the candidate pool.
  3. Analyse water and power before buying equipment. It is cheaper than downtime and a team's loss of trust.
  4. Measure the hiring and retention funnel monthly using the five metrics in the table above.
  5. Analyse TCO through the lens of people: equipment that increases workload ends up costing more than equipment that costs more to buy.
My conclusion: the HoReCa staff shortage will not disappear in the next few years, so the advantage will not be a loud offer at the start but a closed loop: sensible workload, transparent pay, visible growth. Venues that build it in 2026 will save on replacements and gain in revenue.

FAQ: quick answers to related questions

Why is there such a staff shortage in HoReCa in 2026?
A combination of outflow of people, high stress, physical workload from power cuts and competition from other industries. According to OLX Robota (February 2026), 82% of employers named the shortage as their main challenge, and 24% of workers are considering leaving the industry within 1–2 years.
How much does replacing a cook cost?
By the eeat.com.ua model, UAH 15,000–25,000, including search, mentoring, reduced first-month productivity and shift cover. Lost margin comes on top if the vacancy stays open.
Where can I find cooks and waiters?
Through a mix of channels: Work.ua, Robota.ua, OLX Robota, the employment service, colleges, a staff referral program, local professional chats and pools of IDPs and veterans. An open pay rate, a reply within two hours and a paid trial shift are critical.
How can I reduce staff turnover in a restaurant?
Work on four causes: workload (ergonomics, equipment, digital HACCP), schedule (predictability, an alert protocol), money (a transparent grid, a stability bonus) and growth (a skills matrix, cross-training).
Can equipment reduce dependence on cooks?
Partly, yes. A programmable combi oven cuts active time per portion and moves part of the work to a trained operator; in the article's model that is 3.0 → 1.2 min. The result depends on the menu, so verify it with the 20-portion test.
Where do I start if there is no budget for changes?
With what is free: an open rate in the vacancy, a reply within two hours, a trial shift, a rota two weeks ahead, stay interviews and a calculation of turnover cost. Plan equipment investment after the audit.
Author: Ruslan, independent HoReCa analyst. Prepared for eeat.com.ua. The calculation tables are models and need your own data plugged in.

Author: Ruslan, Independent HoReCa Analyst, Expert-Technologist at eeat.com.uaAuthor: Ruslan, Independent HoReCa Analyst, Expert Technologist at eeat.com.ua